Monday, October 26, 2015

Noise removal and sharpening - the leap of faith

Pretty much everything I teach is instantaneous, you know?  You try it, and see the results right away.  That's what we love about digital, I guess.

But there's one thing I teach - again and again and again - whose benefits can't be seen immediately, and for that reason it freaks people out.  I'm talking about proper noise removal.

So many times people say to me: "I can't remove all the noise, because the photo looks plastic."

And every time I respond: "Be MUCH more afraid of noise than plasticity."

The reason is sharpening.  While noise exists in a photo, you can't sharpen it properly.  Once noise is removed, no matter how soft you think the photo looks, it can be sharpened as aggressively as you like, and the results are STUNNING.  Way beyond your wildest dreams.

I know you don't believe me, and I can't blame you.  All I can ask is for you to trust me.  If I've proven my worth to you in other matters of editing, allow me to prove it here as well.  Remove ALL the noise from your photos, and once you've taken the sharpening class, you'll be blown away at how amazing your prints look.

This quote from Marny says it all:

Ok, Damien, you've sold me. I was reaaaaaaaaally skeptical of your methods after I had to add a ridiculous amount on the luminance slider to some photos in order to eradicate every single speck of noise before sharpening. They looked SO hideous and soft and mushy on screen I just couldn't imagine that they were going to print well at all. But I sharpened them and put in my order.

I just received them today and they. look. INCREDIBLE. The skin texture that looked like plastic on screen is perfect after the slight sharpening noise and the very subtle texture of the print. And even after adding up to +70 luminance to some of them they are actually sharper and more detailed than previous photos I had printed unsharpened.

I'm blown away. I've been staring at these for like 10 minutes because they're just so stunning!
None of the above is meant to suggest that you have nothing to fear from noisy images.  Of course you must make every effort to light your photos really well, in order to use low ISOs and prevent underexposure.  Clean images still print the best.

What I want you to understand is that if you haven't been able to prevent noise when taking your photo,  your best chance of making it look good is to remove all the noise, no matter what.

Friday, October 23, 2015

Correcting eyes distorted by glasses

Thick glasses can make people's eyes look small, and sometimes it's nice and flattering to be able to correct this. Usually, it's quite simple.

Note: This method is demonstrated in Photoshop.  It's almost the same in Elements, but there is one little step that can't be performed.  I'll mention them along the way.  By the way, many thanks to Pam Frechette for her permission to use the image segment in this demonstration.

Here's the photo.  See how the glasses have shrunk the face inwards?


Friday, September 4, 2015

Black boxes and other weird behaviour in Photoshop

Since Photoshop CS6 was launched, and subsequently Photoshop CC, we've seen many complaints of weird visual behaviour of the interface.  Here are two scenarios, and possible fixes:

PROBLEM 1: BLACK BOXES ETC

Black boxes that appear and disappear randomly on your images, something like this:


Not only black boxes, though.  Sometimes white boxes, or weird blue colours in the Liquify screen, or image disappearing when you draw a crop marquee, etc.  Annoying stuff. Never problems with the image itself, just with the way it's displayed.

SOLUTION A:  Go to Edit>Preferences>Performance, and click on the "Advanced" button. Change the Drawing Mode to Basic, then restart Photoshop.  In fact, restart your whole computer if you haven't done so recently.

SOLUTION B:  If Solution A doesn't work, go back to Edit>Preferences>Performance, and uncheck the "Graphics Processor" checkbox to turn it off altogether, then restart Photoshop again.

PROBLEM 2: TERRIBLE GRAIN
When your photos look awfully grainy or noisy, but when you zoom in to 100% it goes away.

SOLUTION:  Go to Edit>Preferences>Performance, and check your Cache Levels.  You'll find they're on 1 or maybe 2.  Change them to 4, then restart Photoshop (or your whole computer if you haven't done so for a while):


DESPERATION:

If none of the above solutions work for your issue, fill this out then post the results in Ask Damien, along with a description of your issue, or better still a screenshot to demonstrate it.
 

Thursday, August 27, 2015

About JPEG file size

Redirecting ...

Sunday, August 23, 2015

Simple but important reminder

While you're transferring photos from your card to your computer (whether by cable or card reader*), DON'T DO ANYTHING ELSE ON YOUR COMPUTER.


Not only must you avoid any processor-intensive work such as editing, don't even check your emails or browse Facebook.  NOTHING.  Allow your computer to concentrate solely on the most important task in the world right at that moment - getting your files safely onto your hard drive.

Likewise, when you're backing up your photos to your external drives, or your cloud, or wherever.  Those periods of transfer are SO critical.  If any interruption causes corruption to your files, you might not find out until much later, after you no longer have the original files to fall back on.

Some of you will think that I'm making an unnecessarily big deal about this.  Many of you, in fact, will profess to frequently browsing the web while copying files, and you'll boast that you've never had corruption.  That doesn't mean you're smart, or invincible, it means you're LUCKY.  And luck always runs out, eventually.  When you are mourning the loss of some important photos, believe me, catching up on your friends' news won't seem that important after all.

There's a very important aspect to this which I must discuss.  Many times on forums people post that they've found a corrupted file or files in their set.  Many other people are very quick to say "Oh, your card is corrupted, get a new one."

I've often wondered how many perfectly good cards have been discarded for no reason.  You see, if you find a corrupted file on your computer, there's a very good chance that the corruption happened during the transfer, because you couldn't leave your computer alone for a few minutes.  There's a very good chance that the file on the card was perfectly fine.

So in these online discussions, my first question to the poster is always "Do you still have the files on the card?"  If we're lucky, they still do; in which case they can try copying them across again, and checking if the corruption is still present.  Quite often, I'm pleased to say, it's not.  This is a great outcome - we've got the photo back, and a card wasn't victimised and discarded unnecessarily.

But sadly, often the poster has already formatted the card, and used it again. This sucks, because then we don't know, you see?  We don't know if the problem was the transfer, or if the card itself is truly faulty.  That, of course, means people remain nervous every time they use that card in the future.

So leave your computer alone while files are transferring.  Just chill out.  Make a cup of tea or something.  Don't risk it.

In addition to this, of course observe normal computing common sense.  Shut it down or restart it regularly.  Keep the hard drive at least 1/3rd empty at all times.  And run maintenance software regularly (see the bottom of this page).

*Please don't use a cable.  Always a card reader.

Wednesday, August 19, 2015

Fixing tan lines

This is a very easy method to keep in mind for photos like this one, where tan lines are evident:


(This tutorial deals with darkening the too-white areas to match the tan.  If you want to lighten the tanned areas, The Handyman Method should work satisfactorily.)

This method works in both Photoshop and Elements.  Start by adding a Photo Filter adjustment layer, and increase the Density slider all the way to 100, and turn off "Preserve Luminosity".  The default Warming Filter 85 is usually fine as a starting point:


This will make the whole photo look hideously orange, of course, so invert the mask to hide the effect:


Then start painting on the mask with a very low opacity brush, until the skin is as dark as the other skin around it.  The colour might not be perfect yet, but that's ok - just concentrate on the darkness:


Here's what my mask looked like for this photo:


Once the darkness is good, turn your attention to the colour.  If Warming Filter (85) doesn't look perfect to you, try changing to each of the other Warming filters. You can also try the Orange one further down the list:


If none of those are perfect either, don't panic.  Just choose the "Color" option, and click on the orange square to open the Color Picker:


In the Color Picker, I usually find the H value is most important.  I simply click in that field, then use the wheel of my mouse to take the number up or down, while watching the photo.  For this photo, I found that a Hue of 24 was identical to the surrounding skin:


(Sometimes it's also necessary to fiddle with the S and B values to get your perfect result.)

Here's my outcome. Pretty good, eh?  And so simple.  Nobody would ever know.


For really complex situations, it is sometimes necessary to follow the Photo Filter with some additional touch-ups using The Handyman Method.  Not very often, though.

Needless to say, if all this talk of layers and masking is foreign to you, I beg you to consider my little Layers & Masks Class.  For a tiny fee, it will open up a whole world of editing skills to you.

Monday, July 27, 2015

Buying a Mac or a PC


I love the fist pump baby. He makes me laugh every time. But I'm not posting this for LOLs. I think this is a genuine conversation that needs to be had.

We've all been told many times that Macs are THE computers for the photographic industry. Mac evangelists will tell you that they are SO good that they're worth the considerably larger price tag. Many will tell you that they had a PC that crapped out after two years, but their Mac is still going strong after five years.

Let's assume for a moment that this is true. (It's not true, but let's pretend that it is for the sake of discussion.) Let's also assume that you, the potential computer purchaser, are (a) not exceedingly wealthy, and (b) do not yet own all your other dream gear - that sweet prime lens, that beautiful studio lighting kit, heck, even that amazing mentoring session with that famous photographer in another state.

Thursday, July 16, 2015

Mangled watermarks on Facebook

Occasionally people complain to me that their logo goes all blocky and unclear when it's used as a watermark on their photos on Facebook.  On further enquiry, I generally find that this happens with logos of very vivid colours, or plain logos placed onto areas of very vivid colour on the photo.

Yes, this is because of the aggressive jpeg compression that Facebook applies to our photos, which photographers are always eager to complain about at any opportunity.  As I've insisted in the past, we can't blame Facebook for doing this.

Jpeg compression is not Facebook's creation, though. It was devised many years beforehand.  And it is the nature of jpeg compression that very pure primary colours get degraded more than most.  I don't understand how it works, and it's not important that you do either.  We must simply accept that it is so, and find ways to manage it.

Blue or green screen for background replacement?

If you're taking photos on which you intend to change or replace the background, you might think that a blue or green screen would be best to shoot against.  That's the "traditional" way, right?  But actually, it's a bad idea.  That colour bleeds into hair, and around edges, and it's a replacement nightmare.

This is the order of your options:

BEST: Shoot against the actual colour you want in the photo - no editing necessary.

NEXT BEST: Shoot against a colour which is very similar to the colour you eventually want - minimal editing necessary.

MIGHT BE OK: Shoot against a dark neutral colour if your subject has light hair, or a light neutral colour if your subject has dark hair - the natural contrast will help you replace the colour in editing, but can still be tricky.  (Example)

BAD: Shoot against green or blue (or any other bright colour, really).

VERY BAD: Shoot against a mixed/busy background.

Tuesday, July 14, 2015

Creamy / silky / perfect / angelic skin

This question is asked a lot.  "How can I get that creamy skin?"   There are a few very important aspects to consider:

1. Understand that you're comparing somebody's web-size image with your full-size one

Photos always look better on the internet, especially when you know exactly how to do it right (size, format, sharpening).  Don't make the mistake of looking at skin in somebody else's photo at its small web size, then at your own photo at full zoom - that'll drive you batty.  Be reasonable.

Be especially aware that skilful web sharpening, which makes eyes and hair razor sharp but leaves skin alone, enhances the illusion of "creaminess" of skin.

2. Understand that you're looking at the end result of somebody's hard work

Don't upload your photos straight from the camera, and immediately throw up your hands because the skin ain't creamy.  Quality takes skill, time and effort.

Comments or Questions?

If you have anything to add or ask about this article, please visit me at my Ask Damien page.